StarBlaster III Adjustable Treble Booster Effects Pedal

Zeibek StarBlaster III Adjustable Treble Booster Pedal

The third reincarnation of the original booster pedal only adds to the performance of its predecessors. StarBlaster III has everything you want from a treble booster and more. It is based on that infamous booster of all times, however it is not just another copy. We basically redesigned the bias points and re-adjusted the voltages, in order to make it a better fit to the modern guitarist and her/his high expectations.

We pushed the game one step forward with StarBlaster III, because we made it possible to adjust the corner frequency of the treble boost by the end user. You find the standard 2.2 Khz a little thicker for you? Just drop it to 4 Khz. You are playing with bridge position single coil and need a little push to low-mid harmonics? Set the corner to 480 Hz. You want to boost the whole signal and overdrive your amp, but still want your signal to be articulate? Set it up to be at 125 Hz! The term versatile really goes hand in hand with StarBlaster III. Unity gain occurs around 9 o’clock, so you have plenty of boost left to drive the over out of your preamp or guitar amp.

You will be hard-pressed to find a more adjustable treble booster, which manages to stay pure. There are no tone controls that would steal from your signal or other gimmicks; what you see is exactly what you get.

You can view/download the Quick Start Guides from here and here.

Features:

  • Electric guitar treble booster Pedal
  • Boost Control
  • Frequency selector toggles
  • Takes a 9V Battery (included) or a 9VDC stompbox power supply
  • Reliable and sturdy full metal construction
  • Heavy duty true bypass switch
  • Exclusive low current ultra bright blue status led
  • 1/4″ female output, 1/4″ female input jack (Input jack acts as a on-off switch for the battery)

For information on how we record samples, please visit Recoding FAQ page. The numbers refer to clock positions, for example Tone 12 means tone knob is set to 12 o’clock. If a toggle was set to default position, it is omitted in the title; i.e. if UltraBASS was off, there would be no reference to it. A particular toggle is only mentioned if it was on when that sample was recorded unless it is a two position mode switch.

[audio:III_Dry.mp3|titles= Bypassed Dry Signal (For reference and comparison)] [audio:III_4KHz.mp3|titles= StarBlaster III – Boost 12 – Mode: 4 KHz] [audio:III_2.2KHz.mp3|titles= StarBlaster III – Boost 12 – Mode: 2.2 KHz] [audio:III_1KHz.mp3|titles= StarBlaster III – Boost 12 – Mode: 1 KHz] [audio:III_480Hz.mp3|titles= StarBlaster III – Boost 12 – Mode: 480 Hz] [audio:III_125Hz.mp3|titles= StarBlaster III – Boost 12 – Mode: 125 KHz]

Notice: It may take up to a minute for the sound samples to be loaded, depending on your connection. Please wait until all of them are up for the best listening experience. Samples are listed in no particular order.